Flue Gas Cleaning Arkiv - Filcon

Crematory Filters

gjessing — Mon, 21 Oct 2019 16:18:12 +0000

Due to the higher emission demands from local and national Authorities, Filcon have developed a special Flue Gas Cleaning system for this application.

The pulse jet filter type KF is especially designed, as a compact module, which can be installed in existent buildings and new plants. As the operational staff normally must take care of other issues, the system mainly contains equipment, which demands as little maintenance as possible.

The small dust amount enters the bag filter with the Flue Gas and is creating a “Filter cake” on the outside of the Filter material. A mixture of Sodium bicarbonate (SBC) and Activated Carbon (AC) or Hydrated Lime and AC is injected into the integrated reactor at the Filter inlet, removing the Acid components and the heavy metals (Hg) from the Flue gas.

The system has a fully automatic control system, which easily can be operated by the staff of the Crematory.

The collected ash and absorbent (residue) is automatic transported to a standard ash bin, which secures a high safety for the operational staff.

Indlægget Crematory Filters blev først udgivet på Filcon.

Spot Filters

gjessing — Mon, 21 Oct 2019 15:50:57 +0000

The Filcon ApS Spot filter is a compact and flexible filter solution, designed especially for the removal of dust at the source, (ex. conveyors and bucket elevators).
The dust is collected in the spot filter and returned to the product stream when the filter bags are cleaning by the automatic pulse jet cleaning system.

The standard modules are designed for both horizontal / vertical installation and normally equipped with an integrated draft Fan.

The Main advantages in Filcon ApS spot filters:

– Low operational and maintenance cost.
– High flexibility and easy installation
– Pulse Jet cleaning system
– Integrated draft Fan
– Automatic control and Cleaning system
– Low velocity through large intake, avoiding dust turbulence

For more information, download our PDF file for spot filters under “Service”

Indlægget Spot Filters blev først udgivet på Filcon.

Flue Gas Cleaning

gjessing — Thu, 10 Oct 2019 19:27:57 +0000

Hot flue gas cleaning equipment

To help keep our environment clean, Filcon specializes in the treatment of hot flue gas. Hot flue gas can be generated from biomass, gasification, and/or incinerator plants, and might contain high concentrations of chemical particles which are harmful for humans and the environment.
Filcon flue gas treatment solutions are always customized to meet customer requirements and designed to deal with the actual flue gas composition of pollutants at each specific plant. The air cleaning solution will either be based on a baghouse filter or it will be a complete clean air system consisting of a baghouse, HEPA, and wet scrubber solution.
Filter plant solutions shall meet today’s emission standards which require injection systems for sorbents such as activated carbon, lime and/or bicarbonate. Our engineering team will determine the best solution for each specific situation.
In addition to designing hardware solutions, our engineering team also designs and commissions the software programs to ensure that operations fulfill the emission requirements.

Features
Special features of Filcon hot flue gas cleaning equipment includes:

270° cyclone inlet – to ensure optimal flow in the filter
Good insulation – to neutralize cold spots and corrosion
Flat bottom, no hopper – to ensure the absolute optimal fly ash removal
Intelligent cleaning system – software-controlled bag cleaning based on actual process conditions
Round support structure – self-supporting robust construction
Controlled dosing of lime / AC – based on the actual chemical composition of the flue gas
Low maintenance costs – due to few movable parts and optimal flow conditions
Low chemical consumptions – due to the computer-controlled process dosing system

Indlægget Flue Gas Cleaning blev først udgivet på Filcon.